Technical Specification
Melting Point | 105-110 |
Melt Viscosity @25C | 30-50 cps |
Density@25 C | 0.95 g/cm3 |
Acid Value (mg KOH/g) | NIL |
MW | 1500-2000 |
Penetration@25C | 1.5-2 dmm |
20 ft container | 16 tons(with pallet) |
1)Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic.
2) Act as the dispersant for masterbatches, pigment, carbon black, additive for parent material, filling parent material and other pigments.
3) Act as the additive for shoeshine, floor wax, car wax, polishing wax, chinaware, pill wax, paint, coating, cable, carbon paper, wax paper, textile softening agent etc.
4) The additive for rubber process and car anti-rust agent etc.
![]() |
SHANDONG REPOLYFINE CHEMICAL CO LTD
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |