PVC External Lubricant H-74 is based on high molecular, multi-functional fatty acid esters (complex ester). It is white or slight yellow debris or free-flowing powder, odourless. It doesn dissolve in water but dissolve in tributyl phosphate (TBP) and trichloromethane. Its melting point is 48-56 flash point 230 volatiles96 hour901%.
Physicochemical Properties
Index/Product Name | H74 |
Density g/cm3(80 ) | 0.88-0.93 |
Acid value mg KOH/g | 12 |
Iodine value g 12/100g | 2 |
Viscosity MPa.S(80 ) | 58-70 |
Refractive index (80 ) | 1.420-1.470 |
Product Benefits and Application
H-74 is external lubricant for PVC processing. It suitable for processing rigid/soft PVC granules, sheets, profiles, shrink film and calendered film. It offers improvement of non-tackiness, good release properties, good efficiency as a mould releasing agent with paste processing and also improved flowability. It can also reduce balancing torque and improve surface gloss. Dosage is about 0.3-0.8% (transparent) or 0.3-0.8% (opaque), under special case can increase amount.
Material Safety Data Sheets
MSDS are available outlining hazards and safe handling methods.
Equivalent Grade
LOXIOL G74
For detail, you can contact our Sales and Marketing Department or you can reach us through the contact page .
![]() |
SHANDONG REPOLYFINE CHEMICAL CO LTD
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |